Heat Pump Installation Cost in Irving, Texas
Expect to pay $6,300 to $15,400 for heat pump installation in Irving, TX. Most homeowners end up near $11,300, depending on the equipment tier and how much of the old setup can be reused.
Irving Weather and HVAC Load
Irving logs 2,220 heating degree days and 2,824 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Irving. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. On average, Irving gets 29 freezing nights and 106 days above 90°F per year. Snowfall averages about 2 inches. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 2,220 |
|---|---|
| Cooling degree days / year | 2,824 |
| Nights at or below 32°F | 29 |
| Days above 90°F | 106 |
| Average low / high | 56.5°F / 76.7°F |
Irving Housing Stock
Census figures put the median build year in Irving at 1986, so a typical house here has about 40 years on it. Plenty of houses from this period still run original 1990s or early-2000s equipment, which is past its expected service life. Irving has roughly 36,000 owner-occupied homes, or 38.3% of households. Homes here have a median value of $287,300 and households a median income of $79,641. Those two numbers drive the labor adjustment in our estimate.
Dallas County had 44 hail days and 30 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 4 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Dallas County also had 4 tornado days in that period.
When It Makes Sense
- Energy bills are higher than you want them to be
- The house heats with electric baseboard, oil or propane
- Your AC needs replacing, and you'd like cheaper heat at the same time
What Moves the Price
- Size in tons, and whether the unit is cold-climate rated
- Backup heat, either electric strips or a gas furnace (dual-fuel)
- A ducted system or a ductless mini-split
- Variable-speed (inverter) or single-stage compressor
- Electrical panel capacity and wiring
For Irving we raised the national figures about 14%, based on local income, home values and climate-based equipment sizing. Get at least three written quotes; real bids can land outside this range.
What the Quote Should Cover
- The outdoor heat pump and an indoor air handler or coil
- Thermostat setup and backup heat settings
- Commissioning and warranty registration
- A load calculation and equipment selection
- Line set, drain and electrical hookups
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Irving generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Make sure the installer sized the system for your heating load, not only cooling.
- Ask your electric utility and state energy office what heat pump rebates are open right now.
- A dual-fuel setup keeps your gas furnace as backup for the coldest nights.
Get Free Heat Pump Installation Quotes in Irving
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Heat Pump Installation Questions from Irving Homeowners
How much is heat pump installation in Irving?
Plan on $6,300 to $15,400, with most jobs near $11,300. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule heat pump installation in Irving?
In spring or fall. Those are the slow months between heating and cooling season in Irving.
Do heat pumps work in cold weather?
Yes. Cold-climate heat pumps keep making heat well below 0°F. They lose efficiency as it gets colder, so many homes in cold regions keep backup heat.
How long does a heat pump last?
Usually 12 to 15 years. A heat pump runs year-round, so it needs maintenance twice a year rather than once.
Heat Pump Installation Near Irving
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Dallas Fort Worth Airport; NOAA Storm Events Database 2020-2025, Dallas County. Prices are our estimates, not contractor quotes. Updated 2026.