AC Installation Cost in Irving, Texas

Expect to pay $4,800 to $10,900 for new AC installation in Irving, TX. Most homeowners end up near $8,200, depending on the equipment tier and how much of the old setup can be reused.
Irving Weather and HVAC Load
Irving logs 2,220 heating degree days and 2,824 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Irving. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. On average, Irving gets 29 freezing nights and 106 days above 90°F per year. Snowfall averages about 2 inches. On the cooling side, a 2,000 sq ft house here usually needs around 3.5 tons. A tight, well-insulated house may get by with half a ton less.
| Heating degree days / year | 2,220 |
|---|---|
| Cooling degree days / year | 2,824 |
| Nights at or below 32°F | 29 |
| Days above 90°F | 106 |
| Average low / high | 56.5°F / 76.7°F |
Irving Housing Stock
Census figures put the median build year in Irving at 1986, so a typical house here has about 40 years on it. Plenty of houses from this period still run original 1990s or early-2000s equipment, which is past its expected service life. Irving has roughly 36,000 owner-occupied homes, or 38.3% of households. Homes here have a median value of $287,300 and households a median income of $79,641. Those two numbers drive the labor adjustment in our estimate.
Dallas County had 44 hail days and 30 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 4 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Dallas County also had 4 tornado days in that period.
When It Makes Sense
- The house can't reach the thermostat setting on hot afternoons
- Summer electric bills keep going up
- It still runs on R-22 refrigerant
- The AC is 12 to 15 years old or more
What Moves the Price
- Tonnage, based on house size and local climate
- Electrical work such as a new disconnect, breaker or wiring
- Whether the coil and line set also need replacing
- SEER2 rating and whether the compressor is single-stage or variable-speed
- The pad, permit and refrigerant (R-410A or the newer R-454B)
For Irving we raised the national figures about 14%, based on local income, home values and climate-based equipment sizing. Get at least three written quotes; real bids can land outside this range.
What the Quote Should Cover
- The new condenser, coil and, if needed, line set
- The electrical disconnect and wiring
- Startup, an airflow check and warranty registration
- Removing the old condenser and coil
- Refrigerant charge and a leak test
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Irving generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Fall and early spring installs often come with better pricing and shorter waits.
- Ask what federal, state or utility incentives apply to the model you're quoted.
- Buy the condenser and coil as a matched set, or you may void the manufacturer warranty.
Get Free AC Installation Quotes in Irving
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
AC Installation Questions from Irving Homeowners
How much is new AC installation in Irving?
Plan on $4,800 to $10,900, with most jobs near $8,200. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule new AC installation in Irving?
In spring or fall. Those are the slow months between heating and cooling season in Irving.
What size AC do I need?
It depends on square footage, insulation, windows and climate. The rough rule is a ton for every 450 to 650 sq ft, but only a Manual J calculation gives you a real number.
How long does a new AC last?
With yearly maintenance, 12 to 17 years. Salt air and extreme heat shorten that.
AC Installation Near Irving
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Dallas Fort Worth Airport; NOAA Storm Events Database 2020-2025, Dallas County. Prices are our estimates, not contractor quotes. Updated 2026.