Heat Pump Installation Cost in Garland, Texas

Heat Pump Installation for a home in Garland, Texas

Expect to pay $5,900 to $14,600 for heat pump installation in Garland, TX. Most homeowners end up near $10,700, depending on the equipment tier and how much of the old setup can be reused.

Low end$5,900basic equipment, easy install
Typical$10,700where most quotes land
High end$14,600high efficiency, extra work

Compare Free Quotes in Garland

Heat Pump Installation cost in Garland, TX: $5,900 to $14,600, typical $10,700
Garland price range against the U.S. range, with the climate and housing numbers behind it.

Garland Weather and HVAC Load

Garland logs 2,294 heating degree days and 2,612 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Garland. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. A normal year brings 35 nights at or below freezing and 93 days over 90°F. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.

Heating degree days / year2,294
Cooling degree days / year2,612
Nights at or below 32°F35
Days above 90°F93
Average low / high55.8°F / 75.8°F

Garland Housing Stock

Half the homes in Garland were built before 1978 (Census ACS median), so the typical house is about 48 years old. A lot of these homes are on their second or third system by now. The ductwork is usually original, and leaky joints are common. Owners live in 61.6% of occupied homes, roughly 50,000 households. Homes here have a median value of $248,900 and households a median income of $74,717. Those two numbers drive the labor adjustment in our estimate.

Dallas County had 44 hail days and 30 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 4 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Dallas County also had 4 tornado days in that period.

When It Makes Sense

  • There's no natural gas service on your street
  • Energy bills are higher than you want them to be
  • The house heats with electric baseboard, oil or propane

What Moves the Price

  • Electrical panel capacity and wiring
  • Size in tons, and whether the unit is cold-climate rated
  • A ducted system or a ductless mini-split
  • Variable-speed (inverter) or single-stage compressor
  • Backup heat, either electric strips or a gas furnace (dual-fuel)

We raised the national figures about 8% for Garland using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.

What the Quote Should Cover

  • Thermostat setup and backup heat settings
  • Line set, drain and electrical hookups
  • Commissioning and warranty registration
  • A load calculation and equipment selection
  • The outdoor heat pump and an indoor air handler or coil

Texas Permits, Efficiency Rules and Rebates

Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Garland generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.

Before You Hire

  • Where winters get cold, ask for a model on the NEEP cold-climate list.
  • Ask your electric utility and state energy office what heat pump rebates are open right now.
  • A dual-fuel setup keeps your gas furnace as backup for the coldest nights.

Get Free Heat Pump Installation Quotes in Garland

Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.

Heat Pump Installation Questions from Garland Homeowners

How much is heat pump installation in Garland?

Plan on $5,900 to $14,600, with most jobs near $10,700. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.

When is the best time to schedule heat pump installation in Garland?

In spring or fall. Those are the slow months between heating and cooling season in Garland.

How long does a heat pump last?

Usually 12 to 15 years. A heat pump runs year-round, so it needs maintenance twice a year rather than once.

Do heat pumps work in cold weather?

Yes. Cold-climate heat pumps keep making heat well below 0°F. They lose efficiency as it gets colder, so many homes in cold regions keep backup heat.

Heat Pump Installation Near Garland

Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Richardson; NOAA Storm Events Database 2020-2025, Dallas County. Prices are our estimates, not contractor quotes. Updated 2026.