Heat Pump Installation Cost in Frisco, Texas
Expect to pay $8,400 to $20,700 for heat pump installation in Frisco, TX. Most homeowners end up near $15,200, depending on the equipment tier and how much of the old setup can be reused.
Frisco Weather and HVAC Load
In a normal year, Frisco racks up 2,294 heating and 2,612 cooling degree days (NOAA 1991-2020 normals). Neither season dominates in Frisco. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. On average, Frisco gets 35 freezing nights and 93 days above 90°F per year. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 2,294 |
|---|---|
| Cooling degree days / year | 2,612 |
| Nights at or below 32°F | 35 |
| Days above 90°F | 93 |
| Average low / high | 55.8°F / 75.8°F |
Frisco Housing Stock
Half the homes in Frisco were built before 2009 (Census ACS median), so the typical house is about 17 years old. Newer homes are built tighter, so oversized equipment is a common problem. It short-cycles, wastes energy and leaves rooms clammy. About 49,000 households here own their home, 66.5% of the occupied total. With a median household income of $146,158 and a median home value of $595,400, local labor rates come out above the national middle in our model.
NOAA storm reports for Collin County show 39 hail days and 27 days with damaging thunderstorm winds over the six years from 2020 to 2025. The largest hail reported was 3 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Collin County also had 6 tornado days in that period.
When It Makes Sense
- There's no natural gas service on your street
- The house heats with electric baseboard, oil or propane
- Energy bills are higher than you want them to be
What Moves the Price
- Variable-speed (inverter) or single-stage compressor
- Electrical panel capacity and wiring
- A ducted system or a ductless mini-split
- Size in tons, and whether the unit is cold-climate rated
- Backup heat, either electric strips or a gas furnace (dual-fuel)
We raised the national figures about 53% for Frisco using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.
What the Quote Should Cover
- A load calculation and equipment selection
- Thermostat setup and backup heat settings
- The outdoor heat pump and an indoor air handler or coil
- Line set, drain and electrical hookups
- Commissioning and warranty registration
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Frisco generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Ask your electric utility and state energy office what heat pump rebates are open right now.
- Where winters get cold, ask for a model on the NEEP cold-climate list.
- A dual-fuel setup keeps your gas furnace as backup for the coldest nights.
Get Free Heat Pump Installation Quotes in Frisco
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Heat Pump Installation Questions from Frisco Homeowners
How much is heat pump installation in Frisco?
Plan on $8,400 to $20,700, with most jobs near $15,200. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule heat pump installation in Frisco?
In spring or fall. Those are the slow months between heating and cooling season in Frisco.
How long does a heat pump last?
Usually 12 to 15 years. A heat pump runs year-round, so it needs maintenance twice a year rather than once.
Do heat pumps work in cold weather?
Yes. Cold-climate heat pumps keep making heat well below 0°F. They lose efficiency as it gets colder, so many homes in cold regions keep backup heat.
Heat Pump Installation Near Frisco
- Little Elm $7,200 to $17,800
- Plano $7,200 to $17,700
- Allen $7,600 to $18,500
- Garland $5,900 to $14,600
- McKinney $7,300 to $18,000
- Irving $6,300 to $15,400
- Grand Prairie $6,100 to $15,000
- Laredo $6,100 to $14,900
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Richardson; NOAA Storm Events Database 2020-2025, Collin County. Prices are our estimates, not contractor quotes. Updated 2026.