Furnace Replacement Cost in Denton, Texas
Our 2026 estimate for furnace replacement in Denton, TX is $3,100 to $7,700. That puts Denton right around the national average.
Denton Weather and HVAC Load
Denton logs 2,477 heating degree days and 2,646 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Denton. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. A normal year brings 38 nights at or below freezing and 95 days over 90°F. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 2,477 |
|---|---|
| Cooling degree days / year | 2,646 |
| Nights at or below 32°F | 38 |
| Days above 90°F | 95 |
| Average low / high | 54.5°F / 76.2°F |
Denton Housing Stock
Census figures put the median build year in Denton at 1995, so a typical house here has about 31 years on it. Plenty of houses from this period still run original 1990s or early-2000s equipment, which is past its expected service life. Denton has roughly 27,000 owner-occupied homes, or 49.2% of households. Homes here have a median value of $325,700 and households a median income of $73,719. Those two numbers drive the labor adjustment in our estimate.
Denton County had 53 hail days and 31 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 5.9 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Denton County also had 4 tornado days in that period.
When Replacement Makes Sense
- Gas or electric bills keep climbing even though usage hasn't changed
- A tech found a cracked heat exchanger, or the CO detector has gone off
- A repair quote runs past a third of the cost of a new unit
- The furnace is 15 to 20 years old or more
What Moves the Price
- BTU size, which should come from a Manual J load calculation
- AFUE rating: a basic 80% unit vs. a 96% condensing furnace
- Single-stage, two-stage or modulating gas valve
- Condition of the existing ductwork and any changes it needs
- New PVC venting if you move to a condensing model
- Permit and inspection fees, which the local building department sets
For Denton we kept the national figures close to unchanged, based on local income, home values and climate-based equipment sizing. Get at least three written quotes; real bids can land outside this range.
What the Quote Should Cover
- Gas line and vent connections
- Removing and hauling away the old furnace
- The new furnace, filter rack and thermostat wiring
- The permit and the manufacturer warranty registration
- Combustion and safety tests
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Expect the contractor to pull a mechanical permit for a replacement job in Denton. If a bidder suggests skipping it, move on. Also ask for a Texas license or registration number and proof of insurance. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Make sure all three quotes are for the same AFUE and staging, or you can't compare them.
- Look up utility rebates on 95%+ AFUE units before you buy.
- Replace it in early fall if you can. A no-heat emergency in January costs more and leaves you fewer choices.
Get Free Furnace Replacement Quotes in Denton
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Furnace Replacement Questions from Denton Homeowners
How much is furnace replacement in Denton?
Plan on $3,100 to $7,700, with most jobs near $5,600. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule furnace replacement in Denton?
In spring or fall. Those are the slow months between heating and cooling season in Denton.
How long does a furnace replacement take?
A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.
Is a high-efficiency furnace worth it?
In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.
Furnace Replacement Near Denton
- Brownsville $2,400 to $5,800
- Killeen $2,700 to $6,600
- Amarillo $3,100 to $7,500
- Mesquite $2,900 to $7,200
- Grand Prairie $3,100 to $7,500
- Pasadena $2,600 to $6,400
- McKinney $3,800 to $9,200
- McAllen $2,500 to $6,100
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Denton; NOAA Storm Events Database 2020-2025, Denton County. Prices are our estimates, not contractor quotes. Updated 2026.