Furnace Repair in Arlington, Texas

Furnace Repair for a home in Arlington, Texas

Most furnace repair bills in Arlington come in between $140 and $610, service call included. The busiest week of the year is usually the first hard freeze, when furnaces that sat idle since spring get switched on.

Low end$140simple part, normal hours
Typical$400where most quotes land
High end$610major part or after hours

Compare Free Quotes in Arlington

Furnace Repair cost in Arlington, TX: $140 to $610, typical $400
Arlington price range against the U.S. range, with the climate and housing numbers behind it.

Arlington Weather and HVAC Load

In a normal year, Arlington racks up 2,126 heating and 2,823 cooling degree days (NOAA 1991-2020 normals). Neither season dominates in Arlington. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. Count on roughly 36 nights below 32°F and 106 afternoons past 90°F in a typical year. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.

Heating degree days / year2,126
Cooling degree days / year2,823
Nights at or below 32°F36
Days above 90°F106
Average low / high56.3°F / 77.4°F

Arlington Housing Stock

Census figures put the median build year in Arlington at 1985, so a typical house here has about 41 years on it. Plenty of houses from this period still run original 1990s or early-2000s equipment, which is past its expected service life. About 77,000 households here own their home, 54.8% of the occupied total. With a median household income of $73,519 and a median home value of $276,400, local labor rates come out near the national middle in our model.

NOAA storm reports for Tarrant County show 58 hail days and 38 days with damaging thunderstorm winds over the six years from 2020 to 2025. The largest hail reported was 5 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Tarrant County also had 3 tornado days in that period.

Symptoms Worth a Service Call

  • Banging, squealing or rattling from the furnace
  • Cold air coming out of the vents
  • The thermostat calls for heat and nothing happens
  • The blower won't stop running
  • A yellow or flickering flame instead of a steady blue one

What Moves the Price

  • The furnace's age and brand, which affect parts availability
  • The diagnostic or service call fee
  • Which part failed: a flame sensor costs far less than a control board or blower motor
  • Whether the part is still under the manufacturer warranty
  • Night, weekend or holiday rates

For Arlington we lowered the national figures about 6%, based on local income, home values and climate-based equipment sizing. Get at least three written quotes; real bids can land outside this range.

What the Quote Should Cover

  • A diagnostic check
  • A safety and combustion check
  • A test run through a full heating cycle
  • Replacing the part that failed

Texas Licensing and Efficiency Rules

Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Most repairs don't need a permit. Anyone who opens the refrigerant circuit does need EPA Section 608 certification, and in Texas the company should carry a state license or registration. Ask for both.

Before You Hire

  • If the furnace is past 15, ask the tech to price both a repair and a replacement.
  • Ask whether the diagnostic fee comes off the repair bill.
  • Have the model and serial number from the furnace label handy. Parts get ordered faster.

Get Free Furnace Repair Quotes in Arlington

Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.

Furnace Repair Questions from Arlington Homeowners

What does furnace repair cost in Arlington?

Most bills land between $140 and $610, including the service call. A typical visit is about $400. Night and weekend calls cost more.

What is the most common furnace repair?

Cleaning a dirty flame sensor or replacing a cracked hot-surface ignitor. They're also two of the cheapest repairs.

Should I repair or replace my furnace?

Here's a rule many techs use: multiply the furnace's age by the repair quote. If the number is over $5,000, replacing it usually makes more sense.

Furnace Repair Near Arlington

Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Arlington Municipal Airport; NOAA Storm Events Database 2020-2025, Tarrant County. Prices are our estimates, not contractor quotes. Updated 2026.