Heat Pump Installation Cost in Georgetown, Texas

Expect to pay $6,800 to $16,800 for heat pump installation in Georgetown, TX. Most homeowners end up near $12,300, depending on the equipment tier and how much of the old setup can be reused.
Compare Free Quotes in Georgetown
Georgetown Weather and HVAC Load
NOAA's 1991-2020 climate normals put Georgetown at 1,949 heating degree days and 2,747 cooling degree days per year. Cooling carries most of the load, which is why compressors and condenser fan motors wear out faster here than in northern cities. Count on roughly 28 nights below 32°F and 112 afternoons past 90°F in a typical year. For a 2,000 sq ft house, this climate points to a heating load somewhere near 35,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 1,949 |
|---|---|
| Cooling degree days / year | 2,747 |
| Nights at or below 32°F | 28 |
| Days above 90°F | 112 |
| Average low / high | 55.2°F / 79°F |
Georgetown Housing Stock
Census figures put the median build year in Georgetown at 2007, so a typical house here has about 19 years on it. Newer homes are built tighter, so oversized equipment is a common problem. It short-cycles, wastes energy and leaves rooms clammy. Georgetown has roughly 23,000 owner-occupied homes, or 69.4% of households. The median home value is $398,600, and median household income is $91,857. We use both figures to adjust labor and pricing for this page.
Williamson County had 29 hail days and 14 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 4 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Williamson County also had 3 tornado days in that period. In Georgetown, 28.2% of residents are 65 or older. For older adults, a house with no heat in January or no AC during a heat wave is a medical risk. Mention it when you call, since many companies put those calls first.
When It Makes Sense
- The house heats with electric baseboard, oil or propane
- There's no natural gas service on your street
- Your AC needs replacing, and you'd like cheaper heat at the same time
What Moves the Price
- Variable-speed (inverter) or single-stage compressor
- Backup heat, either electric strips or a gas furnace (dual-fuel)
- Size in tons, and whether the unit is cold-climate rated
- Electrical panel capacity and wiring
- A ducted system or a ductless mini-split
We raised the national figures about 24% for Georgetown using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.
What the Quote Should Cover
- Thermostat setup and backup heat settings
- The outdoor heat pump and an indoor air handler or coil
- Line set, drain and electrical hookups
- A load calculation and equipment selection
- Commissioning and warranty registration
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Georgetown generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Ask your electric utility and state energy office what heat pump rebates are open right now.
- Where winters get cold, ask for a model on the NEEP cold-climate list.
- Make sure the installer sized the system for your heating load, not only cooling.
Get Free Heat Pump Installation Quotes in Georgetown
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Heat Pump Installation Questions from Georgetown Homeowners
How much is heat pump installation in Georgetown?
Plan on $6,800 to $16,800, with most jobs near $12,300. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule heat pump installation in Georgetown?
Between late fall and early spring. With 112 days over 90°F, Georgetown contractors are booked solid all summer, and off-season jobs are easier to schedule and negotiate.
How long does a heat pump last?
Usually 12 to 15 years. A heat pump runs year-round, so it needs maintenance twice a year rather than once.
Do heat pumps work in cold weather?
Yes. Cold-climate heat pumps keep making heat well below 0°F. They lose efficiency as it gets colder, so many homes in cold regions keep backup heat.
Heat Pump Installation Near Georgetown
- Round Rock $6,900 to $16,900
- Leander $8,100 to $19,800
- Cedar Park $7,700 to $19,000
- Wichita Falls $5,200 to $12,800
- San Angelo $5,600 to $13,800
- Edinburg $5,900 to $14,500
- Temple $5,700 to $13,900
- Sugar Land $8,200 to $20,100
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Georgetown Lake; NOAA Storm Events Database 2020-2025, Williamson County. Prices are our estimates, not contractor quotes. Updated 2026.