Furnace Replacement Cost in San Antonio, Texas
Furnace replacement in San Antonio runs about $4,800 for a typical job. Basic installs start near $2,700. High-efficiency equipment with duct or electrical work can reach $6,600.
Compare Free Quotes in San Antonio
San Antonio Weather and HVAC Load
In a normal year, San Antonio racks up 1,527 heating and 2,994 cooling degree days (NOAA 1991-2020 normals). Cooling carries most of the load. Heating equipment gets light use, so a furnace here often outlasts the AC it's paired with. On average, San Antonio gets 22 freezing nights and 112 days above 90°F per year. For a 2,000 sq ft house, this climate points to a heating load somewhere near 35,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 1,527 |
|---|---|
| Cooling degree days / year | 2,994 |
| Nights at or below 32°F | 22 |
| Days above 90°F | 112 |
| Average low / high | 58.1°F / 79.8°F |
San Antonio Housing Stock
Half the homes in San Antonio were built before 1984 (Census ACS median), so the typical house is about 42 years old. A lot of these homes are on their second or third system by now. The ductwork is usually original, and leaky joints are common. Owners live in 52.4% of occupied homes, roughly 287,000 households. With a median household income of $62,917 and a median home value of $219,700, local labor rates come out near the national middle in our model.
NOAA storm reports for Bexar County show 35 hail days and 24 days with damaging thunderstorm winds over the six years from 2020 to 2025. The largest hail reported was 5.5 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Bexar County also had 2 tornado days in that period.
When Replacement Makes Sense
- A tech found a cracked heat exchanger, or the CO detector has gone off
- Some rooms stay cold, the burner short-cycles, or the ignitor keeps failing
- Gas or electric bills keep climbing even though usage hasn't changed
- A repair quote runs past a third of the cost of a new unit
What Moves the Price
- BTU size, which should come from a Manual J load calculation
- New PVC venting if you move to a condensing model
- AFUE rating: a basic 80% unit vs. a 96% condensing furnace
- Single-stage, two-stage or modulating gas valve
- Condition of the existing ductwork and any changes it needs
- Permit and inspection fees, which the local building department sets
We lowered the national figures about 15% for San Antonio using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.
What the Quote Should Cover
- Removing and hauling away the old furnace
- The new furnace, filter rack and thermostat wiring
- Gas line and vent connections
- The permit and the manufacturer warranty registration
- Combustion and safety tests
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in San Antonio generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Make sure all three quotes are for the same AFUE and staging, or you can't compare them.
- Replace it in early fall if you can. A no-heat emergency in January costs more and leaves you fewer choices.
- Ask for the Manual J load calculation in writing. Oversized furnaces are the most common mistake we see.
Get Free Furnace Replacement Quotes in San Antonio
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Furnace Replacement Questions from San Antonio Homeowners
How much is furnace replacement in San Antonio?
Plan on $2,700 to $6,600, with most jobs near $4,800. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule furnace replacement in San Antonio?
Between late fall and early spring. With 112 days over 90°F, San Antonio contractors are booked solid all summer, and off-season jobs are easier to schedule and negotiate.
How long does a furnace replacement take?
A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.
Is a high-efficiency furnace worth it?
In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.
Furnace Replacement Near San Antonio
- Houston $2,700 to $6,700
- Dallas $3,000 to $7,200
- Fort Worth $3,000 to $7,400
- Austin $3,400 to $8,400
- El Paso $2,700 to $6,600
- Arlington $3,000 to $7,300
- Corpus Christi $2,600 to $6,400
- Plano $3,700 to $8,900
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station San Antonio Incarnate Word; NOAA Storm Events Database 2020-2025, Bexar County. Prices are our estimates, not contractor quotes. Updated 2026.