Furnace Replacement Cost in Port Arthur, Texas
Furnace replacement in Port Arthur runs about $4,400 for a typical job. Basic installs start near $2,500. High-efficiency equipment with duct or electrical work can reach $6,000.
Compare Free Quotes in Port Arthur
Port Arthur Weather and HVAC Load
NOAA's 1991-2020 climate normals put Port Arthur at 1,262 heating degree days and 3,075 cooling degree days per year. Cooling carries most of the load. Heating equipment gets light use, so a furnace here often outlasts the AC it's paired with. On average, Port Arthur gets 8 freezing nights and 93 days above 90°F per year.
| Heating degree days / year | 1,262 |
|---|---|
| Cooling degree days / year | 3,075 |
| Nights at or below 32°F | 8 |
| Days above 90°F | 93 |
| Average low / high | 60.3°F / 79.6°F |
Port Arthur Housing Stock
Half the homes in Port Arthur were built before 1975 (Census ACS median), so the typical house is about 51 years old. A lot of these homes are on their second or third system by now. The ductwork is usually original, and leaky joints are common. Port Arthur has roughly 12,000 owner-occupied homes, or 57.2% of households. Homes here have a median value of $96,900 and households a median income of $45,752. Those two numbers drive the labor adjustment in our estimate.
Jefferson County had 8 hail days and 22 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 2.5 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Jefferson County also had 6 tornado days in that period.
When Replacement Makes Sense
- Some rooms stay cold, the burner short-cycles, or the ignitor keeps failing
- A repair quote runs past a third of the cost of a new unit
- A tech found a cracked heat exchanger, or the CO detector has gone off
- The furnace is 15 to 20 years old or more
What Moves the Price
- AFUE rating: a basic 80% unit vs. a 96% condensing furnace
- BTU size, which should come from a Manual J load calculation
- New PVC venting if you move to a condensing model
- Single-stage, two-stage or modulating gas valve
- Permit and inspection fees, which the local building department sets
- Condition of the existing ductwork and any changes it needs
We lowered the national figures about 23% for Port Arthur using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.
What the Quote Should Cover
- The new furnace, filter rack and thermostat wiring
- Combustion and safety tests
- Gas line and vent connections
- The permit and the manufacturer warranty registration
- Removing and hauling away the old furnace
Texas Permits, Efficiency Rules and Rebates
Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Port Arthur generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Look up utility rebates on 95%+ AFUE units before you buy.
- Replace it in early fall if you can. A no-heat emergency in January costs more and leaves you fewer choices.
- Make sure all three quotes are for the same AFUE and staging, or you can't compare them.
Get Free Furnace Replacement Quotes in Port Arthur
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Furnace Replacement Questions from Port Arthur Homeowners
How much is furnace replacement in Port Arthur?
Plan on $2,500 to $6,000, with most jobs near $4,400. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule furnace replacement in Port Arthur?
Between late fall and early spring. With 93 days over 90°F, Port Arthur contractors are booked solid all summer, and off-season jobs are easier to schedule and negotiate.
How long does a furnace replacement take?
A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.
Is a high-efficiency furnace worth it?
In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.
Furnace Replacement Near Port Arthur
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Port Arthur TX Airport; NOAA Storm Events Database 2020-2025, Jefferson County. Prices are our estimates, not contractor quotes. Updated 2026.