Furnace Replacement Cost in Grapevine, Texas

Furnace Replacement for a home in Grapevine, Texas

Expect to pay $3,800 to $9,100 for furnace replacement in Grapevine, TX. Most homeowners end up near $6,700, depending on the equipment tier and how much of the old setup can be reused.

Low end$3,800basic equipment, easy install
Typical$6,700where most quotes land
High end$9,100high efficiency, extra work

Compare Free Quotes in Grapevine

Furnace Replacement cost in Grapevine, TX: $3,800 to $9,100, typical $6,700
Grapevine price range against the U.S. range, with the climate and housing numbers behind it.

Grapevine Weather and HVAC Load

Grapevine logs 2,437 heating degree days and 2,625 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Grapevine. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. Count on roughly 44 nights below 32°F and 104 afternoons past 90°F in a typical year. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.

Heating degree days / year2,437
Cooling degree days / year2,625
Nights at or below 32°F44
Days above 90°F104
Average low / high54.7°F / 76.2°F

Grapevine Housing Stock

Census figures put the median build year in Grapevine at 1992, so a typical house here has about 34 years on it. Plenty of houses from this period still run original 1990s or early-2000s equipment, which is past its expected service life. About 11,000 households here own their home, 51.9% of the occupied total. With a median household income of $111,438 and a median home value of $470,400, local labor rates come out above the national middle in our model.

NOAA storm reports for Tarrant County show 58 hail days and 38 days with damaging thunderstorm winds over the six years from 2020 to 2025. The largest hail reported was 5 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Tarrant County also had 3 tornado days in that period.

When Replacement Makes Sense

  • A tech found a cracked heat exchanger, or the CO detector has gone off
  • Some rooms stay cold, the burner short-cycles, or the ignitor keeps failing
  • A repair quote runs past a third of the cost of a new unit
  • The furnace is 15 to 20 years old or more

What Moves the Price

  • New PVC venting if you move to a condensing model
  • BTU size, which should come from a Manual J load calculation
  • AFUE rating: a basic 80% unit vs. a 96% condensing furnace
  • Condition of the existing ductwork and any changes it needs
  • Single-stage, two-stage or modulating gas valve
  • Permit and inspection fees, which the local building department sets

We raised the national figures about 17% for Grapevine using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.

What the Quote Should Cover

  • The permit and the manufacturer warranty registration
  • Removing and hauling away the old furnace
  • Combustion and safety tests
  • Gas line and vent connections
  • The new furnace, filter rack and thermostat wiring

Texas Permits, Efficiency Rules and Rebates

Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Equipment replacements in Grapevine generally need a mechanical permit, and a reputable contractor will pull it for you. Ask for their Texas license or registration number and a certificate of insurance with the quote. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.

Before You Hire

  • Make sure all three quotes are for the same AFUE and staging, or you can't compare them.
  • Replace it in early fall if you can. A no-heat emergency in January costs more and leaves you fewer choices.
  • Ask for the Manual J load calculation in writing. Oversized furnaces are the most common mistake we see.

Get Free Furnace Replacement Quotes in Grapevine

Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.

Furnace Replacement Questions from Grapevine Homeowners

How much is furnace replacement in Grapevine?

Plan on $3,800 to $9,100, with most jobs near $6,700. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.

When is the best time to schedule furnace replacement in Grapevine?

In spring or fall. Those are the slow months between heating and cooling season in Grapevine.

How long does a furnace replacement take?

A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.

Is a high-efficiency furnace worth it?

In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.

Furnace Replacement Near Grapevine

Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Grapevine Dam; NOAA Storm Events Database 2020-2025, Tarrant County. Prices are our estimates, not contractor quotes. Updated 2026.