Furnace Replacement Cost in Abilene, Texas

Furnace Replacement for a home in Abilene, Texas

Furnace replacement in Abilene runs about $5,000 for a typical job. Basic installs start near $2,800. High-efficiency equipment with duct or electrical work can reach $6,800.

Low end$2,800basic equipment, easy install
Typical$5,000where most quotes land
High end$6,800high efficiency, extra work

Compare Free Quotes in Abilene

Furnace Replacement cost in Abilene, TX: $2,800 to $6,800, typical $5,000
Abilene price range against the U.S. range, with the climate and housing numbers behind it.

Abilene Weather and HVAC Load

Abilene logs 2,319 heating degree days and 2,696 cooling degree days in a normal year, based on the closest NOAA weather station. Neither season dominates in Abilene. That balance is a big reason heat pumps and dual-fuel systems sell well in Texas. A normal year brings 48 nights at or below freezing and 102 days over 90°F. Snowfall averages about 4 inches. For a 2,000 sq ft house, this climate points to a heating load somewhere near 40,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.

Heating degree days / year2,319
Cooling degree days / year2,696
Nights at or below 32°F48
Days above 90°F102
Average low / high53.7°F / 78.2°F

Abilene Housing Stock

The median Abilene home dates to 1974, according to the Census ACS. That makes the typical house about 52 years old. A lot of these homes are on their second or third system by now. The ductwork is usually original, and leaky joints are common. Owners live in 55.6% of occupied homes, roughly 26,000 households. The median home value is $178,900, and median household income is $62,720. We use both figures to adjust labor and pricing for this page.

Between 2020 and 2025, NOAA's Storm Events Database logged 34 hail days and 26 days with damaging thunderstorm winds in Taylor County. The largest hail reported was 3 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage.

When Replacement Makes Sense

  • Gas or electric bills keep climbing even though usage hasn't changed
  • The furnace is 15 to 20 years old or more
  • A repair quote runs past a third of the cost of a new unit
  • A tech found a cracked heat exchanger, or the CO detector has gone off

What Moves the Price

  • AFUE rating: a basic 80% unit vs. a 96% condensing furnace
  • Single-stage, two-stage or modulating gas valve
  • New PVC venting if you move to a condensing model
  • BTU size, which should come from a Manual J load calculation
  • Permit and inspection fees, which the local building department sets
  • Condition of the existing ductwork and any changes it needs

We lowered the national figures about 13% for Abilene using local income, home values and the equipment size this climate needs. Real bids can still come in outside the range, so collect three written quotes.

What the Quote Should Cover

  • Gas line and vent connections
  • Removing and hauling away the old furnace
  • Combustion and safety tests
  • The new furnace, filter rack and thermostat wiring
  • The permit and the manufacturer warranty registration

Texas Permits, Efficiency Rules and Rebates

Texas is in the DOE's Southeast region, where new split central air conditioners need at least 14.3 SEER2 (13.8 SEER2 for systems of 45,000 BTU/h and up). Plan on a mechanical permit for most replacements in Abilene; the contractor normally pulls it. Before you sign, ask each bidder for their Texas license or registration number and proof of insurance. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.

Before You Hire

  • Ask for the Manual J load calculation in writing. Oversized furnaces are the most common mistake we see.
  • Look up utility rebates on 95%+ AFUE units before you buy.
  • Make sure all three quotes are for the same AFUE and staging, or you can't compare them.

Get Free Furnace Replacement Quotes in Abilene

Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.

Furnace Replacement Questions from Abilene Homeowners

How much is furnace replacement in Abilene?

Plan on $2,800 to $6,800, with most jobs near $5,000. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.

When is the best time to schedule furnace replacement in Abilene?

In spring or fall. Those are the slow months between heating and cooling season in Abilene.

Is a high-efficiency furnace worth it?

In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.

How long does a furnace replacement take?

A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.

Furnace Replacement Near Abilene

Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Abilene Regional Airport; NOAA Storm Events Database 2020-2025, Taylor County. Prices are our estimates, not contractor quotes. Updated 2026.