Furnace Replacement Cost in Binghamton, New York
Expect to pay $3,200 to $7,900 for furnace replacement in Binghamton, NY. Most homeowners end up near $5,800, depending on the equipment tier and how much of the old setup can be reused.
Compare Free Quotes in Binghamton
Binghamton Weather and HVAC Load
In a normal year, Binghamton racks up 7,161 heating and 382 cooling degree days (NOAA 1991-2020 normals). Heating is the bigger job here, and furnaces and heat pumps in Binghamton put in far more hours than the air conditioner. On average, Binghamton gets 142 freezing nights and 2 days above 90°F per year. Snowfall averages about 87 inches. For a 2,000 sq ft house, this climate points to a heating load somewhere near 70,000 BTU/h. Treat that as a starting number. A Manual J calculation will move it up or down based on insulation and windows.
| Heating degree days / year | 7,161 |
|---|---|
| Cooling degree days / year | 382 |
| Nights at or below 32°F | 142 |
| Days above 90°F | 2 |
| Average low / high | 37.8°F / 54.8°F |
Binghamton Housing Stock
Census figures put the median build year in Binghamton at 1946, so a typical house here has about 80 years on it. Houses that old often still have duct runs sized for an old coal or oil furnace and 60- or 100-amp electrical panels. Both can add cost when new equipment goes in. Owners live in 43.3% of occupied homes, roughly 9,100 households. The median home value is $117,400, and median household income is $44,331. We use both figures to adjust labor and pricing for this page.
Broome County had 9 hail days and 46 days with damaging thunderstorm winds from 2020 through 2025, according to NOAA storm records. The largest hail reported was 3 inches across. Hail flattens the thin aluminum fins on condenser coils and cuts airflow. After a big storm, take a look at the outdoor unit; homeowners insurance often covers the damage. Broome County also had 2 tornado days in that period.
When Replacement Makes Sense
- The furnace is 15 to 20 years old or more
- A tech found a cracked heat exchanger, or the CO detector has gone off
- Gas or electric bills keep climbing even though usage hasn't changed
- A repair quote runs past a third of the cost of a new unit
What Moves the Price
- New PVC venting if you move to a condensing model
- BTU size, which should come from a Manual J load calculation
- AFUE rating: a basic 80% unit vs. a 96% condensing furnace
- Permit and inspection fees, which the local building department sets
- Condition of the existing ductwork and any changes it needs
- Single-stage, two-stage or modulating gas valve
For Binghamton we kept the national figures close to unchanged, based on local income, home values and climate-based equipment sizing. Get at least three written quotes; real bids can land outside this range.
What the Quote Should Cover
- Combustion and safety tests
- The new furnace, filter rack and thermostat wiring
- Removing and hauling away the old furnace
- The permit and the manufacturer warranty registration
- Gas line and vent connections
New York Permits, Efficiency Rules and Rebates
New York falls in the DOE's North region. New split central air conditioners must meet at least 13.4 SEER2, and heat pumps sold anywhere in the U.S. need 14.3 SEER2 and 7.5 HSPF2. Plan on a mechanical permit for most replacements in Binghamton; the contractor normally pulls it. Before you sign, ask each bidder for their New York license or registration number and proof of insurance. The federal 25C tax credit ended for equipment installed after December 31, 2025, so incentives now come mostly from utilities and state programs. Check your electric and gas utility's rebate page before you pick equipment.
Before You Hire
- Replace it in early fall if you can. A no-heat emergency in January costs more and leaves you fewer choices.
- Make sure all three quotes are for the same AFUE and staging, or you can't compare them.
- Ask for the Manual J load calculation in writing. Oversized furnaces are the most common mistake we see.
Get Free Furnace Replacement Quotes in Binghamton
Tell us where you are and up to three licensed local pros will get in touch. You don't have to hire any of them.
Furnace Replacement Questions from Binghamton Homeowners
How much is furnace replacement in Binghamton?
Plan on $3,200 to $7,900, with most jobs near $5,800. Equipment efficiency, house size and the condition of the ducts and wiring decide where your quote falls.
When is the best time to schedule furnace replacement in Binghamton?
Between late spring and early fall. Binghamton averages 142 freezing nights a year, and heating calls spike from November through February.
How long does a furnace replacement take?
A straight swap is usually done in one day, somewhere between 4 and 10 hours. Moving to a condensing furnace with new PVC venting can add a few more.
Is a high-efficiency furnace worth it?
In cold climates, a 95%+ AFUE furnace usually earns back the price difference in lower gas bills. Where winters are mild, the payback can take a very long time.
Furnace Replacement Near Binghamton
- Niagara Falls $3,100 to $7,700
- West Seneca $3,600 to $8,800
- Irondequoit $3,500 to $8,500
- Troy $3,300 to $8,000
- Levittown $4,700 to $11,300
- Tonawanda Town $3,600 to $8,800
- Hempstead $3,800 to $9,200
- White Plains $4,700 to $11,400
Sources: U.S. Census Bureau ACS 5-year estimates 2019-2023 and 2024 population estimates; NOAA NCEI U.S. Climate Normals 1991-2020, station Binghamton; NOAA Storm Events Database 2020-2025, Broome County. Prices are our estimates, not contractor quotes. Updated 2026.